SABRE DRIVEWAY WIRELESS ALERT SYSTEM W/DOORBELL - HS-DA
ABRE Driveway Wireless Alert System – Model HS-DA
What it is
The SABRE HS-DA is a wireless driveway motion alert system designed to notify you when people or vehicles enter your property — without any wiring. It consists of two main parts:
-
Outdoor motion sensor/transmitter
-
Indoor receiver with a loud alert
These communicate wirelessly so you can hear activity from inside the house.
Key Features
Motion Detection
-
PIR motion sensor detects movement up to about 20 feet (6 m) away.
-
~110° scanning range for broader detection.
Loud Alert
-
115 dB alert chime — loud enough to hear around your home when motion is detected.
Wireless Range
-
Sensors can communicate with the receiver up to approximately 300–390 feet / ~90–120 m apart (clear line of sight).
Battery Powered
-
Outdoor sensor: typically uses AAA batteries (exact number varies by retail listing).
-
Indoor receiver: also runs on batteries (often C or AA).
-
No wiring required — very easy setup.
Weather-Resistant
-
The outdoor motion sensor is designed to withstand weather conditions, so it can be mounted outside near driveways, gates, or walkways.
Installation & Setup
1. Mount the Outdoor Sensor
-
Place near your driveway entrance or where you want the detection zone.
-
Use screws or adhesive (included with some kits).
2. Place Receiver Indoors
-
In a central room or near an entryway so you’ll hear the alert.
3. Sync Sensor and Receiver
-
Follow the instruction manual to pair the units (sometimes press a button to “learn code”).
4. Test the Detection
-
Walk or drive up to trigger the sensor and check that the receiver sounds the alarm.
Quick Specs
| Feature | Detail |
|---|---|
| Model | SABRE HS-DA |
| Detection Range | ~20 ft (~6 m) |
| Wireless Range | ~300–390 ft (~90–120 m) |
| Alert Volume | ~115 dB |
| Power Source | Batteries (not included) |
| Installation | Wireless, no wiring |
| Weather Resistance | Outdoor sensor is weather-resistant |
What It’s Good For
✔ Simple DIY driveway alert system
✔ No wiring — battery-operated
✔ Early notice of vehicles or people approaching
✔ Large outdoor coverage with wireless signal
SABRE DRIVEWAY WIRELESS ALERT SYSTEM W/DOORBELL - HS-DA
ABRE Driveway Wireless Alert System – Model HS-DA
What it is
The SABRE HS-DA is a wireless driveway motion alert system designed to notify you when people or vehicles enter your property — without any wiring. It consists of two main parts:
-
Outdoor motion sensor/transmitter
-
Indoor receiver with a loud alert
These communicate wirelessly so you can hear activity from inside the house.
Key Features
Motion Detection
-
PIR motion sensor detects movement up to about 20 feet (6 m) away.
-
~110° scanning range for broader detection.
Loud Alert
-
115 dB alert chime — loud enough to hear around your home when motion is detected.
Wireless Range
-
Sensors can communicate with the receiver up to approximately 300–390 feet / ~90–120 m apart (clear line of sight).
Battery Powered
-
Outdoor sensor: typically uses AAA batteries (exact number varies by retail listing).
-
Indoor receiver: also runs on batteries (often C or AA).
-
No wiring required — very easy setup.
Weather-Resistant
-
The outdoor motion sensor is designed to withstand weather conditions, so it can be mounted outside near driveways, gates, or walkways.
Installation & Setup
1. Mount the Outdoor Sensor
-
Place near your driveway entrance or where you want the detection zone.
-
Use screws or adhesive (included with some kits).
2. Place Receiver Indoors
-
In a central room or near an entryway so you’ll hear the alert.
3. Sync Sensor and Receiver
-
Follow the instruction manual to pair the units (sometimes press a button to “learn code”).
4. Test the Detection
-
Walk or drive up to trigger the sensor and check that the receiver sounds the alarm.
Quick Specs
| Feature | Detail |
|---|---|
| Model | SABRE HS-DA |
| Detection Range | ~20 ft (~6 m) |
| Wireless Range | ~300–390 ft (~90–120 m) |
| Alert Volume | ~115 dB |
| Power Source | Batteries (not included) |
| Installation | Wireless, no wiring |
| Weather Resistance | Outdoor sensor is weather-resistant |
What It’s Good For
✔ Simple DIY driveway alert system
✔ No wiring — battery-operated
✔ Early notice of vehicles or people approaching
✔ Large outdoor coverage with wireless signal
