{"product_id":"otd-50t-outdoor-intelligent-pir-mv-motion-detector","title":"OTD-50T - Outdoor Intelligent PIR+MV Motion Detector","description":"\u003ch2\u003e**Outdoor Intelligent PIR+MV Motion Detector\u003c\/h2\u003e\n\u003cp\u003e1\u003cstrong\u003e.General Introduction On Outdoor Application\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e This detector is remarkable in function, but the following notices can make itmore\u003cbr\u003estable if installer can pay attention to them:\u003cbr\u003e Direct or reflective sun light is no good for detector operation, try to avoid them during installation. Our outdoor\u003cbr\u003ePIR adopts double-layered screen light sensing system, which is very effective for screeing of interfering light.\u003cbr\u003e\u003cstrong\u003eSUNSHINE\u003c\/strong\u003e\u003cbr\u003e High weeds and shrubbery in detection range may wave in wind and cause false alarm, especially for those detectors\u003cbr\u003eoperating in horizontal fan area, so keep cutting on weeds and shrubbery.\u003cbr\u003e\u003cstrong\u003eWEEDS\u003c\/strong\u003e\u003cbr\u003e Sudden rainstorm can cool the hot pitch road or surface of other roads quickly. And all detectors can detect rain\u003cbr\u003ein the sky, but detector with down view window can even detect water on ground, which will bring much more\u003cbr\u003einterference to detectors outdoor than that mounted on wall, so everything will lower its temperature similar to water,\u003cbr\u003e human body or cars after pouring from rain can offer very little temperature gap for detection, so sensitivity will\u003cbr\u003ebe lowered a lot.\u003cbr\u003e\u003cstrong\u003eRAIN\u003c\/strong\u003e\u003cbr\u003e Insects will trigger false alarm when they climb into detector or stay on lens, while those staying away from\u003cbr\u003edetectors can't trigger alarm. If there is interference from insects, please re-install detector or use insecticide.\u003cbr\u003eAnd please adopts strictly sealed components on those drilled holes or glass glue around detector.\u003cbr\u003e\u003cstrong\u003eINSECTS\u003c\/strong\u003e\u003cbr\u003eMoving car in detection range may trigger false alarm to detector.\u003cbr\u003e\u003cstrong\u003eCAR\u003c\/strong\u003e\u003cbr\u003e Detector is sensitive to change from temperature difference in detection area, if target temperature is very close to\u003cbr\u003eprevious environment temperature, there will be no temperature change, detector sensitivity will be lowered and\u003cbr\u003ewill not be triggered sometimes when there is intrusion.\u003cbr\u003e\u003cstrong\u003eINSUFFICUENT TEMPERATURE DIFFERENCE\u003c\/strong\u003e\u003cbr\u003e Lens becomes easily dirty when used outdoor, so please check the lens from time to time in order to avoid alarm\u003cbr\u003e miss caused by low sensitivity from dirty lens.\u003cbr\u003e\u003cstrong\u003eDIRT ON LENS\u003c\/strong\u003e\u003cbr\u003e Detector will trigger false alarm easily if installation base can be interfered by vibration, this is the reason why\u003cbr\u003e some detectors installed near to street can cause false alarm easily\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.DISCLAIMER\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eI. Product limitation\u003c\/strong\u003e\u003cbr\u003eThis wireless detector is a highly qualified product worthy of trust, but below situations might appear in radio transmission and certification limitation (FCC or other principles):\u003cbr\u003eA. Whatever code is selected, control panel may be blocked caused by interference from radio signal or wave in similar frequencies.\u003cbr\u003eB. Control panel can only receive an alarm signal from 1 detector in 1 time.\u003cbr\u003eC. Make regular tests on radio devices in order to confirm interference is not from them and guarantee its stability\u003cbr\u003eII. Frequencies distribution in Europe\u003cbr\u003e315MHz Limited in all EU members\u003cbr\u003e 433.92MHz No limitation in EU members\u003cbr\u003eIII. Standards\u003cbr\u003eThis device is certified with 1999\/5\/EC standards and index on radio and telecom terminal devices, 315MHz\u003cbr\u003ethe module is certified with 15 part of FCC standard, operation must follow below conditions:\u003cbr\u003e 868.95MHz Allowed in all EU members\u003cbr\u003e869.2625MHz No limitation for all EU\u003cbr\u003e(1)This device should not organize harmful interference.\u003c\/p\u003e\n\u003cp\u003e(2)This device must obey any interference source, including those may cause improper operation. Operator should not\u003cbr\u003echange the product at random, manufacturer not suggest or allow user to make modification on product except for those operation approved by FCC. Digital circuit of this product has passed test lab's test and follow B grade digital\u003cbr\u003einstruments standard; it is coherent with article 15 of FCC, these limitations offer protection to no  interference\u003cbr\u003efrom family devices. This device mainly produce radio transmission power, improper installation may cause nocuous\u003cbr\u003einterference to TV or other radio devices. And also, there is no guaranty of nocuous RF interference after each installation.\u003cbr\u003eIf device cause interference, can be recognized by switch on\/off, user can lower interference by following steps:\u003cbr\u003e- Re-adjust or place position of antenna on receiver\u003cbr\u003e- Enlarge distance between transmitter and receiver\u003cbr\u003e-Turn to professional people or sellers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3.Introduction on Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a digital wireless motion detector with remarkable functions, it can avoid outdoor interference from sunshine,\u003cbr\u003eUV \u0026amp; RF, head light on car etc and is highly effective for water\/dust\/insects\/ wind proof. It is matched with follow advanced\u003cbr\u003etechnology: direct calculation and analysis technology from intelligent high-speed microchip to intrusion infrared signal,\u003cbr\u003edouble polarity test technology, automatic temperature compensation technology, direct adjustment technology to\u003cbr\u003esensitivity on digital signal, filtering technology from multi-layer infrared channels to mixed light. Its particular\u003cbr\u003ecalculation on pets chargeable data can avoid false alarm caused by 20kg small animals effectively. At the same\u003cbr\u003etime, it is also outstanding in anti hot air, waving curtains etc, can offer forced test on the base of 2-grade sensitivities.\u003cbr\u003eIts unique low-power-consumption solution can offer a guaranty of 24 months' factory battery life expectancy. In\u003cbr\u003ea word, this detector is advanced and stable enough to offer best security Protection indoor and outdoor with its\u003cbr\u003e IP65 water proof structure.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.Main Function\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e-Super mini power-consumption solution\u003cbr\u003e-2 grade sensitivities for option\u003cbr\u003e-Digital pet immunity up to 20kg\u003cbr\u003e-Bi-directional temperature compensation\u003cbr\u003e-EDS\/electric shock proof\/mobile interference proof\u003cbr\u003e-Anti white light\u003cbr\u003e-Fully sealed optical parts\u003cbr\u003e-Multi-direction bracket fit for corner\/wall\/ceiling mount\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.Technical Parameter \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePower : 9-16VDC\u003cbr\u003eCurrent : 30mA\u003cbr\u003eMount height : 1.8m-2.4m\u003cbr\u003eDetection range :12m*12m 100°\u003cbr\u003eSensitivity :\u003cbr\u003eAnti EMI :0.1-500MHz\/30V\/m\u003cbr\u003eAnti white light :\u0026gt;10000 LUX\u003cbr\u003eAlarm time : 3s\u003cbr\u003eOperation temperature :-10℃\/+55℃\u003cbr\u003eOperation humidity :95% RH\u003cbr\u003eDetection speed :0.2-3.5 m\/s\u003cbr\u003eFire proof : ABS plastic\u003cbr\u003ePet immunity : 20kg\u003cbr\u003eSize :148*75*54mm\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6. INSTALLATION GUIDE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSelect most suitable installation point fit for PIR detection, put detector onto proper position, keep away\u003cbr\u003efrom door, window, running machine or heat source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.Installation \u0026amp; Bracket\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWall Mounting:\u003c\/p\u003e\n\u003cp\u003eUse a cross-type screw driver to loose screw at\u003cbr\u003ebottom of housing and open covers as figure, and\u003cbr\u003e then move down PCB unit, then installation can\u003cbr\u003ebe ready to start.\u003cbr\u003eLoose PCB unit screw as figure, press down the\u003cbr\u003ebuckles with 2 fingers, PCB unit can be taken down.\u003cbr\u003eThen detector can be installed according to actual\u003cbr\u003e needs.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to get best signal coverage, detector must\u003cbr\u003ebe installed at the height of 2.1m vertically. Make\u003cbr\u003esure that there is no obstacle in front of detector,\u003cbr\u003edetection angle is wide. Make decision on which\u003cbr\u003einstallation way according to actual needs, and\u003cbr\u003ethen make a mark on needed holes on wall, drill\u003cbr\u003e4 holes with 6mm diameter, insert relevant 4\u003cbr\u003erubber stoppers into the holes, then detector can\u003cbr\u003e be fasten onto the wall by screws.\u003c\/p\u003e\n\u003cp\u003eLoose PCB unit screw as figure, press down the\u003cbr\u003ebuckles with 2 fingers, PCB unit can be taken down.\u003cbr\u003eThen detector can be installed according to actual needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e9. Walking Test \u0026amp; Setting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMW\u003c\/strong\u003e\u003cbr\u003eTune microwave tuner to minimum, capacity can be adjusted\u003cbr\u003efrom 2-15m to the extremity of protection area when LED\u003cbr\u003eindicator turns off operation radial movement to the detector,\u003cbr\u003echeck MW detection by green LED. If green LED doesn't light,\u003cbr\u003eturn the MW tuner in clock wise to increase its capacity; repeat\u003cbr\u003ethis tests for several times till you get the required distance.\u003cbr\u003eRemarks: MW adjustment turn the capacity to the minimum,\u003cbr\u003efor MWcan penetrate wall while over high capacity is not helpful\u003cbr\u003efor detector function in its protection area. MW gets highest\u003cbr\u003esensitivity when it performs radial movement to detectors\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePIR\u003c\/strong\u003e\u003cbr\u003eClose the front cover, when LED indicator turns off, perform\u003cbr\u003ehorizontal movement in the detection area, check the detection\u003cbr\u003estatus of PIR through the yellow LED. This step can check\u003cbr\u003ewhether there is deal corner in the detection area; when PIR\u003cbr\u003egets highestsensitivity when horizontal movement to detector.\u003cbr\u003eWhen all DIP switches are in “OFF” status, monitor is in\u003cbr\u003estandard operation.\u003cbr\u003e\u003cbr\u003eWhen jumper is set to LOW, sensitivity of two sensors is low\u003cbr\u003eWhen jumper is set to OFF, even if detector is triggered,\u003cbr\u003eLED will not light just for the purpose of invisibility\u003cbr\u003e(Recommended)\u003cbr\u003ePIR During the time, signals detected by both negative and\u003cbr\u003epositive period of PIR are limited.\u003cbr\u003eMW the detection response speed of MW is 0.5 seconds\u003cbr\u003erunning speed is 0.6m\/second.\u003cbr\u003eSensitivity \u0026amp; LED Setting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e10. WIRE UP THE TERMINAL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe contact is closed normally, if remove the\u003cbr\u003efrontsmall cover or the whole detector from\u003cbr\u003ethe wall, contact will open. (sensor connects\u003cbr\u003ewith wall in lay style monitor)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e11.Vertical adjustment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDetector can get its best detection by setting of PCB\u003cbr\u003evertical height, strongly suggest installer should make\u003cbr\u003eoptimum setting to PCB vertical height according to actual\u003cbr\u003eenvironment\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e12.Pet immunity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePet immunity is a high index for judgment of PIR detector function, we adopt 2 methods on pet\u003cbr\u003eImmunity process at the same time:\u003cbr\u003e1.Physical method: special process of Fresnel lens detection area to lower false alarm rate caused\u003cbr\u003eby small animals\u003cbr\u003e2.Software analysis method: analysis on technical data on detector signal and make comparison\u003cbr\u003ewith data base in the microchip in detector, then draw a conclusion on moving object to verify\u003cbr\u003eit is human being or pets.\u003cbr\u003e From above we can know that function of pet immunity is relevant, this relativity includes 2 parts: firstly, pet immunity\u003cbr\u003e is relevant, but its false alarm rate is greatly lowered comparing detectors without pet immunity function, at the same\u003cbr\u003etime, there is limitation on pets' quantity and size. Secondly, installation is very important to pet immunity, it is with\u003cbr\u003esome requirements, not a random installation can reach a good result, so please read details in the manual before installation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"247 Technologies","offers":[{"title":"Default Title","offer_id":44204855427237,"sku":"OTD-50T","price":700.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0113\/4251\/2224\/files\/WhatsAppImage2024-09-17at14.05.07_1.jpg?v=1726574780","url":"https:\/\/security.sabreproducts.com\/products\/otd-50t-outdoor-intelligent-pir-mv-motion-detector","provider":"Sabre Security Mart","version":"1.0","type":"link"}